Adding to Cart...

COVID-19 Information and FAQ

Top Tronic Digital Clamp-On Meter T9001

SKU IP21778 | Pennywise Ipswich
$189.00

This Clamp-On meter is pre-owned but in good condition, the case has marks on it as photo shows. Backed with our 90 Day Warranty

SPECIFICATIONS:

Display:  3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.

Over-range: “OL.” mark indication.

Low battery indication: The “ ” is displayed when the battery voltage drops below the operating level.

Measurement rate: 2 times per second, nominal.

Operating Environment: 0°C to 50°C at < 70% R.H.

Storage Temperature: -20°C to 60°C at < 80% R.H. with battery removed from meter.

Accuracy: Stated at ambient temperature 18°C to 28°C (65°F to 82°F), <70% R.H.

Temperature Coefficient: 10% of applicable accuracy per °C(5% per °F) outside the range of 18 to 28°C(65°F to 82°F).

Altitude up to 2000m.

MAX. Cable size: 34Ømm.

Safety Conformance: All input are protected to EN61010-1, 1000V CAT III.

Pollution degree II.

Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.

Battery life: 200 hours typical with carbon-zinc.

Dimensions: 233mm (H) x 80mm (W) x 43mm (D)

Weight: Approx. 11oz. (344g) including battery.

DC VOLTS

Ranges: 400mV(menu), 4V, 40V, 400V, 600V

Resolution: 1mV(0.1mV on 400mV range)

Accuracy: ±(0.5% rdg + 1dgt)

Input impedance: >10MΩ

Overload & protection: 1000V DC or 750V AC rms.

AC VOLTS (45Hz to 500Hz)*

Ranges: 400mV(menu), 4V, 40V, 400V, 600V

Resolution: 1mV(0.1mV on 400mV range)

Accuracy: ±(1.0% rdg + 4dgts) on 4V to 600V (at 45Hz to 500Hz)

Input impedance: >10MΩ

Overload & protection: 1000V DC or 750V AC rms. * Range 400mV no specification.

Note: When measuring voltage of AC 4V/60Hz, due to the relatively high input impedance, the meter is sensitive to noise, and result in unstable at last digit.

AC CURRENT (45Hz to 500Hz)

Ranges: 40A, 400A, 600A

Resolution: 0.01A

Accuracy: ±(1.5% rdg + 10dgts) at 50 to 60Hz ±(3.5% rdg + 10dgts) at 45 to 500Hz

Overload & protection: 700A AC max for 1 minute.

Accuracy at the center of CT.

CONTINUITY Audible indication: it beeps less than 5 ohms and turns off greater than 60 ohms.

Overload protection: 600V DC or AC rms

RESISTANCE

Range: 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ

Resolution: 0.1Ω

Accuracy: ±(1.0%rdg + 3dgts) on 400Ω to 4MΩ range ±(3.0%rdg + 4dgts) on 40MΩ range

Open circuit volts: 0.4V DC

Overload protection: 600V DC or AC rms.

DIODE TEST

Accuracy: ±(3.0% rdg + 3dgts)

Resolution: 1mV

Test current: 0.5±0.3mA

Test voltage: <1.6V DC

Overload protection: 600V DC or AC rms

CAPACITANCE (Auto ranging)

Ranges: 40nF, 400nF, 4uF, 40µF, 100µF(15 sec.)

Resolution: 0.01nF

Accuracy: ±(3.0% rdg + 10dgts) (use zero)

Overload protection: 600V DC or AC rms

NCV TEST

Test Range: 100 to 600V AC max to ground

Frequency: 50/60 Hz

Dielectric Strength: 2000V, 1 minute, 100uA or less during dielectric strength test

FREQUENCY (Auto ranging)

Range: 5Hz, 50Hz, 500Hz, 5KHz, 50KHz, 500KHz, 5MHz

Resolution: 0.001Hz

Accuracy: ±(0.1%rdg + 3dgts) on 5Hz to 10KHz

Sensitivity: ≥2Vrms (VΩ, COM) on 5Hz to 10KHz ≥10Vrms(VΩ, COM) on 10K to 5MHz TTL or SINE wave signal on all range ≥5Arms at 45 to 500Hz (at JAW)

Overload protection: 600V DC or AC rms.

DUTY CYCLE (2Hz to 10KHz)

Ranges: 10% to 90%

Resolution: 0.1%

Accuracy: ±(2%rdg+5dgts)

Sensitivity: 2Vrms (VΩ, COM)

Overload protection: 600V DC or AC rms

Tax included.
  • Brand:
    Top Tronic
  • Category:
    Accessories
    , Clamp On Meter
    , Tools
  • Colour:
    Black
    , Red
  • Location:
    Ipswich
×

Secure Shipping Australia Wide

Fast Dispatch

Save big compared to buying new!

Australian Owned

90 Day Warranty

Information

Delivery

We ship our secondhand goodness across Australia via the Australia Post and Star Track Express network.  Shipping costs are calculated at check out and are dependant on the weight of your purchase.

For all orders placed before 12pm (AEST) between Monday to Friday we will dispatch same day.  Orders after 12pm (AEST) will be dispatched the following business day.

If your order contains a pick up only item, we will contact you within 4 business hours to confirm when your item is available to be collected.  If you require collection sooner, please contact the relevant store once you have made your purchase

For more information on shipping please see our delivery page.

Warranty and Returns

Purchasing our Second hand Goodness you can be assured of our quality guarantee.

Our products are tried, tested and trusted.

Most items sold by Pennywise are covered by a 90 day fault warranty. This means, if your item arrives, or becomes faulty within 90 days of your purchase, you may contact the store that sold the item for refund, exchange or repair.

Please note that this 90 day warranty only covers faults with an item, and does not cover refunds for change of mind.

For more information on warranty and returns please click here.

In Store Location

Pennywise Ipswich

50 Limestone St, Ipswich QLD 4305

07 3281 4565

Monday - Friday 8:30am–5:30pm
Saturday 8:30am–4:00pm
Sunday 9:30am–2:30pm

Similar Items