Adding to Cart...

COVID-19 Information and FAQ

Enerdrive DC 2 DC 40+amp Battery Charger/ MPPT

SKU IP52205 | Pennywise Ipswich
$399.00

This Enerdrive Battery Charger is in new condition. 

Backed with our 90 Day Warranty

Specs:



Model EN3DC40+
Output Rating
Output Voltage 12V Nominal (8.0V min)
Output Current (Maximum) 40A ~ 50A
Output Power 775W
Charger DC Output (CH1):
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range 13.8V – 15.5V
Float Voltage Range 13.0V – 13.8V
Charger Current (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalise Voltage (Flooded Battery) 15.5V
Equalise Charging Current 10% of Bulk Current Setting
Charging Control 2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank Single (non isolated)
Current draw from CH1 when not in use < 50mA
Battery Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency 95%
INPUT Rating (CH2 – MPPT Solar)
Input Voltage 14.5 – 45VOC
Maximum Input ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
INPUT Rating (CH3 – Start/Alternator)
Input Voltage 10.5 – 16VDC / 21 – 32VDC
Dimensions
Height x Width x Depth 242mm x 172mm x 74mm
Unit Weight 1.85 Kg
Shipping Weight 2.17 kg

EN3DC40+ Features:

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in Enerdrives AC mains ePOWER battery charger. GEL, AGM, Flooded, Lithium and the ability to create  a full custom profile
  • Vehicle input allows for either 12v or 24v and a maximum solar input of 45V/800W
  • 40A+ output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included with charger for more accurate battery charging

Three Stage Charging Process

The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries,

The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array.

As dictated by battery manufacturer’s recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages.

Stage 1 – Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible.

Stage 2 – Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge.

Stage 3 – Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.

Smart Charging Feature

The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank.


Tax included.
  • Brand:
    Enerdrive
  • Category:
    Battery Charger
  • Colour:
    Black Green
  • Location:
    Ipswich
×

Secure Shipping Australia Wide

Fast Dispatch

Save big compared to buying new!

Australian Owned

90 Day Warranty

Information

Delivery

We ship our secondhand goodness across Australia via the Australia Post and Star Track Express network.  Shipping costs are calculated at check out and are dependant on the weight of your purchase.

For all orders placed before 12pm (AEST) between Monday to Friday we will dispatch same day.  Orders after 12pm (AEST) will be dispatched the following business day.

If your order contains a pick up only item, we will contact you within 4 business hours to confirm when your item is available to be collected.  If you require collection sooner, please contact the relevant store once you have made your purchase

For more information on shipping please see our delivery page.

Warranty and Returns

Purchasing our Second hand Goodness you can be assured of our quality guarantee.

Our products are tried, tested and trusted.

Most items sold by Pennywise are covered by a 90 day fault warranty. This means, if your item arrives, or becomes faulty within 90 days of your purchase, you may contact the store that sold the item for refund, exchange or repair.

Please note that this 90 day warranty only covers faults with an item, and does not cover refunds for change of mind.

For more information on warranty and returns please click here.

In Store Location

Pennywise Ipswich

50 Limestone St, Ipswich QLD 4305

07 3281 4565

Monday - Friday 8:30am–5:30pm
Saturday 8:30am–4:00pm
Sunday 9:30am–2:30pm

Similar Items